Gardeners use a garden hose to water the plants. Apart from this, they are also used for cleaning cars and lawns.

An average garden hose ranges from 20 to 100 feet in length. So it’s pretty challenging to maintain and store it properly as it takes up a lot of space.

One of the problems with long hoses is it gets tangled every time you use them.

Moreover, detangled hoses get damaged quickly.

So if you’ve faced similar issues, we have the perfect thing for you!

Put, if you want to properly store your hose after use, save storage space, and avoid the damages, we’re with this how to coil a garden hose guide for you.

Here we’ll cover everything needed to know for rolling a hose properly without kinks. So let’s dive deep into it.

How to Coil a Hose Without Kinks

The first step is always harder, but it gets easier with time.

That’s the same case for rolling a garden hose too.

Before starting, you might wonder how you can roll up a pipe more than 60 feet long.

But trust me, with a proper guideline and some simple steps, you can DO IT BY YOURSELF.

Remember that you must not rush while coiling a garden hose. Take your time and get the job done smoothly!

Step 1: Disconnect Hose from Faucet

The first step to roll a hose properly is disconnecting your garden hose from the water faucet.

You need to drain out the water inside it and detach it from any connection.

Step 2: Detangling the Hose

Most users go for a long hose for a few benefits.

You can use the long hose to cover a larger area, and they’re portable at the same time.

Alongside the benefits, there are drawbacks as well.

Whether it’s a long hose or a short one, garden hoses get detangled.

The second step is to detangle the kinks on the hose pipe.

To do this, you need to lay the hose pipe on flat ground and untangle the kinks on your own.

Step 3: Drain the Water Inside the Hose

Even after disconnecting the hose pipe from the water faucet or supply, the hoses contain a small amount of water inside them.

The best way to coil a garden hose is to drain out the water.

Place the entire hose on flat ground.

Now take one end of the hose and put it above the shoulder height.

Now start moving from that end to the other one.

As one end is slightly higher than the other, the water will get drained out from the lower end.

Step 4: Coiling a Garden Hose

Now let’s get to the main part on how to coil a garden hose. The best way to roll a hose is to start from the part that connects with the water supply/faucet.

  • 1. You need to make a loop with this end of the hose. The loops should be around 2 to 3 feet in diameter, nothing more than that.
  • 2. For your information, there are various ways by which you can coil a garden pipe. Each method has its advantages and disadvantages as well. Considering all types of users, we’re gonna show the over-under method here.
  • 3. You need to repeat the first coiling process again. Place this second loop on top of the first one. But the third loop or coil will go under the previous one. So one will go over the previous one, and the next one will go under. Following this pattern, you need to coil the whole hose pipe.

    Yes, we know, it’s a tiring job to coil a hose pipe.

    But with the right process and techniques, it’ll not take more than 2-3 minutes.

    However, you can also take the help of a friend or family member to help you with the coiling process.

So that’s it on how to coil up a hose. But the rolling or coiling process doesn’t end with only looping.

There’s just a little bit left to do as well.

Step 5: Tying up the Hose Pipe

If you’ve followed this far, you certainly know about coiling a hose pipe.

Usually, the hose pipes are made of rubber and plastic.

So only coiling them isn’t enough for holding this position and storing.

Now take some rope ties or solid ties and wrap them around the coiled hose.

Be careful not to tie them too tightly or too loosely. It would help if you covered the ropes so that the coiled hose doesn’t unwrap itself.

For better results, we recommend tying ties in multiple places of the coiled/rolled hose.

Tying the hose pipes with ties or ropes acts as the cherry on top.

With this touch, now you know how to coil a garden hose.

While doing it for the first time, it might feel a little bit difficult. The loops may get loose or come out from the coil, but you’ll get expert on this with time.

Bonus Tip

Many users find the over-under method difficult. The reason is, the loops are harder to create and don’t hold up properly.

So for them, we’ve got an alternate way to coil a hose pipe.

How to Wrap a Hose Around Your Arm

Apart from the looping process, the other coiling processes are the same as the previous one.

This process is for those who couldn’t make the hose lopping properly.

Follow step 1 to step 3, just like shown above.

In step 4, grab one of the garden pipes and start to wrap it. But here, we’ll use our elbow and shoulder to make the loops.

The garden hose will first make a small loop at the elbow and go on to the shoulder to complete the loop.

While doing this, the elbow and shoulder should be at a 90-degree angle.

Every time the hose makes a loop, it’ll have a gap in between them.

And when the final layer comes, it’ll go underneath the second-last loop.

After that, all you need to do is tie the coils with ropes or ties.

How to Roll up Hose for Winter

Rolling up a hose follows the same process or methods for any season. Whether it’s summertime or winter, you need to coil the hose in such a way after use.

Never delay with coiling up the hoss, or else they can get damaged and leaked.

As garden hoses aren’t that necessary during winter, you can coil them up and store them for further use.

Properly coiling and tying the pipes is a convenient garden hose storage hack that only a few know!


For being too long, gardeners often keep the hose pipes under the open sky.

But with time, the hose pipes get tangled, leaked, and damaged.

If you don’t want to buy garden hoses regularly, you should know how to coil a garden hose. Not only you but other users should also grasp this method as well.

We hope our guide on coiling a pipe will come in handy for users.

We tried to provide a clear idea so that you can learn this technique from the basics.

So use our guidelines and get rid of tangled, damaged, and leaking garden hoses!