Pop-up sprinklers are in demand in the market right now for their versatility and user-friendliness.
One thing that keeps people away from it is maintenance. Yes, for your information, pop-up sprinklers need maintenance, too, just like any other mechanical device!
However, the maintenance procedure isn’t costly every time, and most of the time, the main problem occurs when dirt or debris clogs the sprinkler heads.
As pop-up sprinklers remain under the ground and when needed to irrigate the fields, dirt and debris can easily get inside them.
So to prevent this, you need to lubricate the heads so that they can do the pop up function easily and operate properly at the same time.
So if you’re wondering about how to lubricate pop up sprinkler, you’re at the right place.
How to Lubricate Pop Up Sprinkler Heads
Lubricating pop up sprinkler heads is very easy, and you don’t have to have prior knowledge or high end skills to do it.
If you’re done with choosing the perfect lubricant for the pop up sprinklers, here’s what you need to do next-
- Wear safety gloves at first,
- After that, remove the sprinkler head,
- Now take the lubricant bottle and spray it inside the head and the other parts,
- Let them rest for a while,
- And that’s it. Lubricating is done!
This is the same procedure while applying grease as well. Be careful not to over-lubricate the parts!
What Is the Best Lubricant for Pop Up Sprinklers?
There are varieties of options to choose from. But we highly recommend using WD-40 lubricant in your pop up sprinklers.
They’re water-resistant, which will act as a shield against the water and keep the lubricants safe.
However, you can use other lubricants as well. Check the user’s manual that came with the sprinkler system. IF there’s any recommended lubricant, use it.
In case you don’t want to lubricate pop up sprinklers using the recommended lubricant, you can use petroleum jelly on the sprinkler heads.
This will get the job done too.
Other alternatives are using a plumber’s grease or any penetrating oil.
Pop up Sprinkler Heads Sticking? Here is the Solution!
As said earlier, it’s quite common that sprinkler heads can get stuck.
The reason is obvious. The sprinkler heads remain underneath the ground, and they only pop up while irrigating or watering the land or the lawn.
As the sprinkler heads are used to water the fields, the heads remain wet most of the time.
And that is one of the sole reasons why dirt or debris gets inside them or sticks to the surroundings.
The dirt and debris prevent regular irrigation systems and clog the full sprinkler if the amount is too high.
As a result, you cannot water your lawn properly as water pressure will be low.
But let’s now focus on the pop up sprinkler sticking.
If you see your sprinkler heads stuck, you should first clear the dirt and debris with water.
You can use a hose pipe or any other way to clean the dirt.
After that, turn on the water supply and see whether the water pressure is adequate or not.
If not, take down the sprinkler heads and other components and locate the issue!
![How to Lubricate Pop Up Sprinkler [The Easiest Way] 4 prevent pop up sprinkler heads from sticking](https://fundamentalgardening.com/wp-content/uploads/2022/06/prevent-pop-up-sprinkler-heads-from-sticking-1024x682.webp)
How to Prevent Pop Up Sprinkler Heads From Sticking?
Pop up sprinkler mechanism is a little bit different than other sprinkler systems.
The sprinkler heads need to be lubricated to freely pop in and pop up.
These need to pop up from time to time, so lubricating sprinkler heads is essential.
Lubricants help the sprinkler heads to perform freely with minimal friction. They increase the life cycle of the sprinklers as well.
On top of that, they act as a shield too.
That being said, lubricating sprinkler heads is highly essential and recommended.
But most people just ignore it, considering the cost. But one thing they don’t understand is that this is cost-efficient in the long run.
There’s a high chance of sprinklers getting damaged or broken due to high friction if lubricants aren’t used.
Conclusion
Lubricating pop-up sprinkler heads is essential if you’re planning to use the sprinkler system for a long time.
Using petroleum jelly or grease is a temporary solution.
We highly recommend using certified lubricants for your garden sprinkler heads, as they’ll be much more effective in the long run.
As you now know How to Lubricate Pop Up Sprinklers, what are you waiting for?
Grab your lubricant spray bottle, lubricate the pop-up sprinklers and experience the satisfying pop-up!
Frequently Asked Questions
How Deep Are Pop Up Sprinklers?
Pop-up sprinklers should be at least around 15 inches deep inside the ground. This will prevent the sprinklers from getting damaged.
Are Pop Up Sprinklers Worth It?
Absolutely! Pop-up sprinklers will be an exceptional choice for owners with a large lawn.
They’re semi-automatic and need no manual labor.
Besides, they’re an easier way to water or irrigate large land evenly. They’re quick and time-efficient!